Product Overview
Bezerk RC teamed up with Turt3zy to create the LT-1 and its more durable cousin, the LT-1D FPV racing frame.
"The frame has worked great for me with low weight, amazing flight charateristics and super solid arms so you can SEND IT!"
Chassis plates are made from high quality twill weave matte carbon 2.0mm as is the arm locking plate.
Toplate features -
- accomodates a wide variety of VTX mounting, reciever & antenna mounting
- provides protection for your precious electronics 
- Zip tie slots galore!
Midplate features -
-depending on the version you choose, there's plenty of options for stack mounting!
-high strength and very low weight
LT-1:
The 45 degree rotated 20x20 stack keeps weight down by minimizing the hardware required but also maximizing strength by reducing the length of the frame's body and helps keep your electronics nice and safe
LT-1D:
Want to just do a normal build with no wacky stack mounting?
The LT-1D uses a straight 20x20 stack which is easier to build out, especially for beginners.
It will fit the Foxeer 60a wide ESC nice and snug but ESCs shaped like the Foxeer 60a Slim may have troubles being mounted like this as the tolerances are pretty tight, but do not fear! The stack can be rotated 90 degrees which will help accomodate most electronics.
The LT-1D also has a bit more motor protection for those who don't mind the additional weight, although it's not exactly a huge difference.
20x20 stack mounting, straight and 45 degree rotated
plenty of prints available online
~40g of Carbon for both the 1D and normal LT-1
Arms are a solid 5.0mm carbon and accept 16 x 16 motors (basically all 5" motors)
Stainless pressnuts are included in the kit price.
Hardware required to complete the build -
LT-1:
4 m3*4-6mm screws
4 m3*12-15mm screws
2 m3*25mm screws
2 m3*20mm screws
4 m3*20-25mm standoffs
2 m3*10mm screws
LT-1D
5 m3*4-6mm screws
4 m3*12-15mm screws
4 m3*20mm screws
4 m3*20-25mm standoffs
2 m3*10mm screws
