Product Overview
An evolution to IQ0's No Brainer frame is the Big Brainer race frame.
NOTE: Choose model of the Big Brainer that you're flying from the dropdown menu when choosing parts, now includes the standard model and the EVO!
Arm movement is minimised with the introduction of four keys toward the ends arms. The keys are orientated to accept load across the weave rather than endgrain loading.
Main chassis plates are cut 45/45 weave to provide a very torsionally stiff platform for the weight of the plates. Six pressnuts are provided for easier arm removal, loosen one screw and remove one to remove an arm. Lower plate is countersunk for a battery friendly surface to strap against.
Choose arms with a 16x16x3mm or 12x12x2mm motor pattern. Arms are made from a high quality carbon.
Hardware sets now available. Standoffs are 23mm for that extra low stack height.
Midplate comes with pressnuts.
Arm braces now added for extra protection where required. These are currently only for the 16x16x3mm motor pattern. Price is per brace. Made from 4.0mm carbon.
This frame attracted lots of interest of the prototype flown by Bezerk supported Ironoid at the 2023 FPV Nationals.
