Product Overview
If you've purchased the Bezerk RC YZ-10 94 Lipo chassis and want a carbon alternative to the 870c battery cradle, we have a few options here for you.
Option A - Using a 3.0mm battery cradle/loop, we have allowed for some adjustment in and outward to fine tune your left right balance. This same cradle is used for all the options. Standoffs are supplied to get the swing tabs of your choice up to the right height. Note your battery height before ordering to select the right length. For example, 23mm battery height, minus 3mm for the cradle gives you 20mm standoffs. Shim them at the base fine tune.
Option B - Same as above, just different shaped swing tabs
Option C - Same cradle as above but an o-ring option to allow for different battery heights. We use shorter standoffs (12mm) and some AE B7 o-ring holders to get the job done, one end is captive so you don't lose your o-ring between battery changes.
Most packs are around 97mm long, so the last option would be "standard" length. Some of the ultra low packs are 93mm long, so if you're going there select "compact"
